Viewing The Number Of Current Lamp Strikes (L/St); Viewing The Current Software Version (Ver); Viewing Dmx Status And Construct Values (Fixt) - High End Systems Studio Spot 250 User Manual

Viewing the Number of Current Lamp Strikes (L/ST)

To view the number of times the fixture has struck (or attempted to turn on) the
current lamp:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "INFO" menu
and press the <Enter> button to select the "INFO" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "L/ST" option
and press the <Enter> button to select the "L/ST" option. The LED will
display the number of times the fixture has struck the current lamp.
Note: Lamp strikes are automatically reset when the lamp hours are reset
(see "Resetting Lamp Hours (L/RS)" on page 4-39).

Viewing the Current Software Version (VER)

To view the current software version:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "INFO" menu
and press the <Enter> button to select the "INFO" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "VER" option
and press the <Enter> button to select the "VER" option. The LED will
display the fixture's current software version.
Note: The software version is also displayed when you exit the menu system
(see "Identifying Display Panel Components" on page 1-7).

Viewing DMX Status and Construct Values (FIXT)

This menu option allows you to view DMX status and construct values for the fixture.
You should follow this procedure if you are having a particular problem with a fixture;
for example, a color wheel that does not respond to commands from the controller.
The following DMX status information is available for viewing:
• FE - framing errors (it is normal for this value to be incrementing rapidly)
• OV - overruns (changing values could indicate data link/connector problems)
• STRT - start code
The following construct values are available for viewing:
• PANH - high 8-bit pan value
• PANL - low 8-bit pan value
®
Studio Spot 250 / Studio Color
®
250 User Manual Understanding the Menu System
4
4-35