Swapping Pan And Tilt (Swap); Inverting Tilt (T/In); Figure 4-2. Perpendicularly-Hung Fixture - High End Systems Studio Spot 250 User Manual

Swapping Pan and Tilt (SWAP)

This menu option swaps the pan motor and tilt motor
operation. This option allows a perpendicularly-hung
fixture to respond to pan and tilt movement commands
in the same direction as a fixture hung normally (see
Figure 4-2).
To swap pan and tilt motion:
1. Press and hold the <Menu> button until
"ADDR" appears on the LED display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "SET" menu
and press the <Enter> button to select the "SET" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "SWAP" menu
and press the <Enter> button to select the "SWAP" menu.
4. Using the <Up> and <Down> arrow buttons, choose the "ON" option to
swap the fixture's pan and tilt motion, or the "OFF" option to return the
or
fixture's pan and tilt motion to normal orientation. Press the <Enter>
button to select the desired option.

Inverting Tilt (T/IN)

This menu item inverts the direction of the tilt motor, which
allows a fixture standing upright (i.e., resting on its bottom panel)
to respond to tilt movement commands in the same direction as
a fixture hung normally (see Figure 4-3).
To invert the fixture's tilt motion:
1. Press and hold the <Menu> button until "ADDR"
appears on the LED display.
2. Using the <Up> and <Down> arrow buttons, scroll
to the "SET" menu and press the <Enter> button to
select the "SET" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "T/IN" menu
and press the <Enter> button to select the "T/IN" menu.
4. Using the <Up> and <Down> arrow buttons, choose the "ON" option to
invert the fixture's tilt motion, or the "OFF" option to return the fixture's tilt
or
motion to normal orientation. Press the <Enter> button to select the
desired option.
4-22 Understanding the Menu System
Figure 4-2. Perpendicularly-
hung fixture.
®
Studio Spot 250 / Studio Color
Figure 4-3.
Inverted fixture.
®
250 User Manual