Testing The Led Display (Disp); Information Menu (Info); Viewing The Current Logic Board Temperature (Pcb) - High End Systems Studio Spot 250 User Manual

Testing the LED Display (DISP)

To perform a self-test on the LED display:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "TEST" menu
and press the <Enter> button to select the "TEST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "DISP" option
and press the <Enter> button to select the "DISP" option. The LED will
run through its self test.
4. Press the <Menu> button to exit the test.
Note: The self test will run continuously until you press the <Menu> button
to exit the test.

Information Menu (INFO)

The Information menu allows you to view current fixture information such as internal
temperature, lamp hours, total fixture hours, lamp strikes, software version, total
fixture hours, DMX errors, and view DMX data for any device on the link. You can
also reset the lamp hours or fixture hours. The procedures below are listed in the
order they appear on the menu map (see Table 4-1 or Table 4-2).

Viewing the Current Logic Board Temperature (PCB)

This menu option allows you to view the current ambient temperature at the logic
board inside the fixture.
To view the logic board temperature:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "INFO" menu
and press the <Enter> button to select the "INFO" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "PCB" option.
(This will be the first option displayed.) Press the <Enter> button to select
the "PCB" option. The LED will display the current internal temperature of
the fixture's logic board in degrees centigrade.
The maximum temperature for the logic board is 85 C. If this maximum
temperature is exceeded, the fixture will shut down and the LED panel will
display "PCB TEMP ERR." For more information on LED display error
messages, see "LED Display Error Messages" on page 8-1.
®
Studio Spot 250 / Studio Color
®
250 User Manual Understanding the Menu System
4
4-33