Effects Rotate
The Effects Rotate construct is available only for Studio Spot 250 fixtures and is
controlled with DMX channel 11. The effects rotate settings are listed in Table 3-10.
Effects Rotate Setting
Forward Rotate
Rotate Stop
Reverse Rotate
Focus
The Focus construct is available for both Studio Spot 250 and Studio Color 250
fixtures. This construct is controlled with DMX channel 12 for Studio Spot 250 fixtures
or DMX channel 10 for Studio Color 250 fixtures.
In Studio Spot 250 fixtures, the variable focus construct moves the lens inside the
fixture to allow you to focus on a close image (construct value of 0) or on an image
farther away (construct value of 255).
In Studio Color 250 fixtures, the Focus construct uses the motorized zoom to change
the beam angle from 21° (construct value of 0) to 25° (construct value of 255).
Note:
When adjusting the focus on Studio Spot 250 fixtures, you can focus on
the litho wheel or the effects wheel to create different patterns and/or
effects.
Iris
The Iris construct is available only for Studio Spot 250 fixtures and is controlled with
DMX channel 13. The iris settings are listed in Table 3-11.
Iris Setting
Close
Variable Iris
Open
Periodic Strobe (Variable)
Random Strobe (Variable)
Ramp Open/Snap Shut (Variable)
®
Studio Spot
250 / Studio Color
Table 3-10. Effects Rotate Settings
Determines how fast the specified effect will spin forward (within the
wheel).
Stops the specified effect from spinning (within the wheel).
Determines how fast the specified effect will spin in reverse (within the
wheel).
Table 3-11. Iris Settings
Closes the iris.
Determines the diameter of the beam.
Fully opens the iris.*
Strobes the beam diameter at specified intervals.
Strobes the beam diameter at random intervals.
Fully opens the iris at variable speeds, then snaps shut at full
speed.
®
250 User Manual
Description
Description
Operating the Fixture
3
3-11