Color Function; Table 3-2. Color Function Settings - High End Systems Studio Spot 250 User Manual

Color Function

The Color Function construct is available for both Studio Spot 250 and Studio Color
250 fixtures and is controlled with DMX channel 5. This construct determines how the
Studio Spot 250 color wheel or the Studio Color 250 cyan, magenta, and yellow color
wheels move. The Color Function construct values can be enabled in either full
speed (controller crossfading the wheel positions), or MSpeed (MSpeed control of the
wheel motor). For more information on MSpeed, see "MSpeed (Motor Speed)" on
page 3-13.
The color function settings are listed in Table 3-2.
Fixture Color
Type Function
Indexed
Forward Spin
Reverse Spin
Continuous
Studio Spot
250
Slow Scan
Fast Scan
Random
Blink-indexed
Continuous
Indexed
Pure Mix
Spin
Studio Color
250
Cycle
TBD
Random
Blink-indexed
3-4 Operating the Fixture

Table 3-2. Color Function Settings

Allows the color wheel to take the quickest path and snap to the chosen
whole or half color.
Allows a forward color wheel spin at variable speeds.
Allows a reverse color wheel spin at variable speeds.
Allows positioning at any point on the color wheel (allows for a smaller
"step" between color wheel positions for color crossfades).
Performs a slow scan of one full color wheel position from each side of
the selected whole or half color.
Performs a fast scan of one full color wheel position from each side of
the selected whole or half color.
Selects random whole color positions at variable speeds.
Closes then reopens the shutter between indexed color changes.
Allows positioning at any point on the cyan, magenta, and yellow color
wheels (allows for a smaller "step" between color wheel positions for
color crossfades).
Divides the cyan, magenta, and yellow color wheels into eight equal
sections.
Accesses only the portion of the cyan, magenta, and yellow color wheel
used for color mixing.
Puts all three (cyan, magenta, and yellow) color wheels in spin mode.
Uses only the color-mixing portion of the cyan, magenta, and yellow
color wheels to cycle colors from red to green to blue at variable speeds
(rate set by cyan DMX channel).
Reserved for future use.
Performs a random color chase of 12 factory-selected colors using the
cyan, magenta, and yellow color wheels at variable speeds (rate set by
cyan DMX channel).
Closes then reopens the shutter between indexed color changes.
Description
®
Studio Spot 250 / Studio Color
®
250 User Manual