Figure 5-2. Example Of Synchronized Playback - High End Systems Studio Spot 250 User Manual

Table of Contents

all the clocks (see Figure 5-2). If a slave fixture has a longer sequence length, it will

restart at scene 1 before it completes its entire sequence.

00:00:00

00:15:00

Master

Scene 1

00:00:00 00:10:00

Slave 1

Scene 1

00:00:00 00:10:00 00:20:00

Slave2

Scene 1 Scene 2

To enable synchronized playback:

1. Link the fixtures you want to synchronize (see "Linking the Fixtures" on

page 1-7).

Make sure you terminate the last fixture in the link and that there are no

DMX controllers on the link.

2. Assign one fixtures as the master fixture by assigning it a unique DMX start

channel 1 or fixture number 1.

Make sure no other fixture on the link is assigned DMX start channel 1 or

fixture number 1.

3. Set preset playback on for all fixtures on the link (see "Setting Preset

Playback (PLAY)" on page 4-39).

Note:

If there is a controller on the link, or if more than one fixture is assigned

a DMX start channel 1 or fixture number 1, the master fixture's LED will

display "LINK BUSY ERR," wait for three minutes, then try to transmit

the time code again.

Studio Spot

250 / Studio Color

00:35:00 00:50:00

01:00:00

Scene 2

Scene 3

Scene 4

00:55:00

Scene 2

00:40:00

Scene 3