Copying An On-Board Memory Scene (Copy); Capturing A Preset Scene (Capt) - High End Systems Studio Spot 250 User Manual

Copying an On-Board Memory Scene (COPY)

1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "PRST" menu
and press the <Enter> button to select the "PRST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "COPY" menu
and press the <Enter> button to select the "COPY" menu.
4. The LED will display "FROM." Press the <Enter> button to enter the
"FROM" menu.
5. Using the <Up> and <Down> arrow buttons, scroll to the scene you
to
want to copy from (source scene) for either user A ("FA01" - "FA16") or
or
user B ("FB01" - "FB16"). Press the <Enter> button to select the desired
to
scene.
6. The LED will display "TO." Press the <Enter> button to enter the "TO"
menu.
7. Using the <Up> and <Down> arrow buttons, scroll to the scene you
to
want to copy to (destination scene) for either user A ("TA01" - "TA16") or
or
user B ("TB01" - "TB16"). Press the <Enter> button to select the desired
to
scene.
The fixture will copy the desired scene to the selected scene location.
When the fixture finishes the copy successfully, "DONE" will appear briefly
in the fixture's LED display.

Capturing a Preset Scene (CAPT)

Preset capturing is a way to automate the creation of scenes on multiple Studio Spot
250 and Studio Color 250 fixtures connected to a DMX 512 link. Use a DMX controller
to create a scene, then save (capture) the scene into a fixture's presets to play back the
scene without the controller. When capturing a scene into a fixture's presets, all
construct values must be constant (i.e., there cannot be any pan/tilt movement or
scene-to-scene sequencing).
This menu option can be accessed for either user type A or user type B. However,
you must first set the fixture to the desired user type - either user A or user B. For more
information on setting the user type, see "Setting the User Type (USER)" on page 4-26.
After creating a scene with your DMX controller, follow the instructions below for
each fixture on which you want to capture preset scenes:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
®
Studio Spot 250 / Studio Color
®
250 User Manual Understanding the Menu System
4
4-41