Enabling The Preset Default (Dflt) - High End Systems Studio Spot 250 User Manual

2. Using the <Up> and <Down> arrow buttons, scroll to the "PRST" menu
and press the <Enter> button to select the "PRST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "CAPT" menu
and press the <Enter> button to select the "CAPT" menu.
4. Using the <Up> and <Down> arrow buttons, scroll to the scene you
want to copy the preset scene to (destination scene) and press the
to
<Enter> button.
Pressing the <Enter> button will copy the DMX-512 controller's preset
scene to the selected scene on your fixture's on-board 16 scene memory
for either user A or user B. When the fixture finishes the capture
successfully, "DONE" will appear briefly in the fixture's LED display.
Note: You must use the fixture's on-board scene memory to manually select
values for the XFAD and DLAY constructs, since a DMX controller will
not transmit those construct values. For more information on preset
programming, see Chapter 5.

Enabling the Preset Default (DFLT)

This menu item enables the factory-programmed preset sequence or fixture self-
demo. Enabling this menu item will erase any pre-programmed scenes or construct
values on your fixture's on-board memory.
This menu option can be accessed for either user type A or user type B. However,
you must first set the fixture to the desired user type - either user A or user B. If you
have pre-programmed scenes you do not wish to erase, you can set the fixture to a
different user type (A or B) and then enable the preset default for the different user
type (see "Setting the User Type (USER)" on page 4-26).
To enable the self-demo:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "PRST" menu
and press the <Enter> button to select the "PRST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "DFLT" menu
and press the <Enter> button to select the "DFLT" menu. The LED
display will show "OK?"
4. Press the <Enter> button to enable the self-demo or press <Menu> to
exit the menu option.
Note: To play the fixture's self-demo, you must set preset playback on
(see"Setting Preset Playback (PLAY)" on page 4-39).
4-42 Understanding the Menu System
®
Studio Spot 250 / Studio Color
®
250 User Manual