Chapter 2 Installing The Fixture - High End Systems ecodome User Manual

Chapter 2 Chapter 2 Chapter 2 Chapter 2
Installing the Fixture Installing the Fixture
Installing the Fixture Installing the Fixture
You should have already prepared the site and mounted the Ecodome base as described
in Chapter 1 before following the instructions in this chapter.
You will need:
• a fixture suitable for mounting in Ecodome (see "Installation Requirements" on
page 1-4)
• ratchet and
• 3/4" deep socket
• #2 Philips-head (torque-measuring) screwdriver
• 3/32" allen wrench (supplied with Ecodome)
• two light blocks (supplied with Ecodome)
• four 8-32 x 3/8" pan head screws (supplied with Ecodome)
• four 3/8" hex screws (supplied with Ecodome)
• four 3/8" regular washers (supplied with Ecodome)
• four 3/8" hex nuts (supplied with Ecodome)
1
Locate the support beams on the Ecodome base.
®
Ecodome User Manual
support beams
Installing the Fixture
2
2-1