Opening The Shutter (Shut); Selecting A Dim Value (Dim); Selecting A Pan Value (Pan); Selecting A Tilt Value (Tilt) - High End Systems Studio Spot 250 User Manual

Opening the Shutter (SHUT)

1. Using the <Up> and <Down> arrow buttons, scroll to the "SHUT"
construct. (This will be the first construct displayed.) Press the <Enter>
button to select the shutter construct.
2. Using the <Up> and <Down> arrow buttons, scroll to the desired shutter
value (in this example, "OPEN") and press the <Enter> button to select
the desired value.

Selecting a Dim Value (DIM)

1. Using the <Up> and <Down> arrow buttons, scroll to the "DIM"
construct and press the <Enter> button to select the dim construct.
2. Using the <Up> and <Down> arrow buttons, scroll to the desired dim
value (in this example, "D255") and press the <Enter> button to select the
desired value.

Selecting a Pan Value (PAN)

1. Using the <Up> and <Down> arrow buttons, scroll to the "PAN"
construct and press the <Enter> button to select the pan construct.
2. Using the <Up> and <Down> arrow buttons, scroll to the desired pan
value (from "-49.9" to "+49.9") and press the <Enter> button to select the
desired value.

Selecting a Tilt Value (TILT)

1. Using the <Up> and <Down> arrow buttons, scroll to the "TILT"
construct and press the <Enter> button to select the tilt construct.
2. Using the <Up> and <Down> arrow buttons, scroll to the desired tilt
value (from "-49.9" to "+49.9") and press the <Enter> button to select the
desired value.

Choosing a Color Wheel Control Value (COLC)

1. Using the <Up> and <Down> arrow buttons, scroll to the "COLC"
construct and press the <Enter> button to select the color wheel control
construct.
2. Using the <Up> and <Down> arrow buttons, scroll to the desired color
wheel control value (in this example, "IDX") and press the <Enter> button
to select the desired value.
5-4 Preset Programming
®
Studio Spot 250 / Studio Color
®
250 User Manual