Figure 7-1. Remove The Two Panel Covers; Table 7-1. Description And Function Of Fuses - High End Systems Studio Spot 250 User Manual

2. Determine which fuse to replace by referring to Table 7-1.
Fuse Type and Rating
6.3 A, 250 V, Fast
F1
Blow only
2.5 A, 250 V, Fast
F2
Blow only
6.3 A, 250 V, Slow
F3
Blow only
3. Using a wide-tip, flat head screwdriver, loosen the two panel cover retaining
screws on each side of the fixture and remove the fixture's two panel covers (see
Figure 7-1).
two panel retaining screws
7-2 General Maintenance

Table 7-1. Description and Function of Fuses

Size
Motor supply and fan
5mm x 20mm
supply
5mm x 20mm Logic board
5mm x 20mm Main fuse

Figure 7-1. Remove the two panel covers.

Protects
If the fixture is operating normally
and this fuse blows, the LAD (if
applicable) and the lamp will turn
off, the motor LED will be off, and
the motors will not move. If
power is cycled when this fuse is
already blown, the LED
alphanumeric display panel will
remain blank.
Fixture shuts down, motor LED
may be on.
Fixture shuts down, all status
LEDs are off, the fixture will not
receive power.
two panel covers
®
Studio Spot 250 / Studio Color
Symptom of Failure
®
250 User Manual