Figure 7-22. Remove The Screws That Secure The Lens To The Lens Assembly - High End Systems Studio Spot 250 User Manual

3. Remove the three #2 Phillips-head lens screws and remove the lens by pulling
it straight up from the assembly (see Figure 7-22).

Figure 7-22. Remove the screws that secure the lens to the lens assembly.

4. Place the new lens in the assembly.
Note: Before installing the new lens, you may need to clean it by using a soft,
lint-free cotton cloth and a mild glass cleaning solution (containing no
ammonia).
5. Replace and tighten the three #2 Phillips-head lens screws that secure the lens
to the lens assembly.
6. Replace the bezel and engage the bezel latches.
7-18 General Maintenance
remove the three lens screws and pull
the lens straight up from the assembly
lens
Studio Spot
® ®
250 / Studio Color 250 User Manual