Figure 7-9. Cutout On The Mid Plate Under The Color Wheel - High End Systems Studio Spot 250 User Manual

2. Locate the cutout on the mid plate under the color wheel (see Figure 7-9).
Manually rotate the color wheel until the dichroic you wish to replace is
directly over the cutout.
front plate
Litho wheel
mid plate

Figure 7-9. Cutout on the mid plate under the color wheel.

3. Place your finger through the cutout and push the dichroic you wish to replace
toward the center of the wheel (and under the retaining clip) to free it from
the two wheel tabs as shown in Figure 7-10.
Figure 7-10. Free the dichroic by pushing it toward the retaining
4. Once the dichroic is free of the two wheel tabs, angle the free end up and pull
the dichroic out of the wheel.
7-8 General Maintenance
®
Studio Spot 250 / Studio Color
Effect wheel
Color wheel
cutout to access
color wheel
®
250 User Manual