Figure 7-18. Location Of The C-Clips, Lens Shafts, Focus Screw, And Lens Assembly; Figure 7-19. Location Of The Eight Screws On The Optical Assembly Front Plate - High End Systems Studio Spot 250 User Manual

2. Using a C-clip tool, remove the two C-clips from the lens shafts (see Figure 7-
18).

Figure 7-18. Location of the C-clips, lens shafts, focus screw, and lens assembly.

3. Remove the lens
assembly by rotating
the focus screw while
pulling the assembly
up and off of the lens
shafts (see Figure 7-
18).
4. Remove the eight #2
Phillips-head screws
from the optical
assembly front plate
(see Figure 7-19).
5. Carefully separate the
optical assembly by
folding the front plate
back toward the
sensor bracket (see
Figure 7-20).
7-14 General Maintenance
lens
assembly
optical
assembly
front plate
Figure 7-19. Location of the eight screws
on the optical assembly front plate.
Studio Spot
c-clips on
the lens
shafts
focus
screw
remove these screws
®
250 / Studio Color
®
250 User Manual