Table of Contents
Advertisement
Chapter 1
Setup and Installation
Unpacking the Fixture
Unpack the Studio Spot 250 or Studio Color 250 and verify that the fixture arrived
without damage. Inspect both the outside of the fixture for physical damage and the
optical assembly for damage to glass components. To access the optical assembly,
release the two latches located on the fixture head and remove the bezel (see Figure
1-1).
release the two
bezel latches
If the fixture is damaged, notify both the shipping agent and your sales agent
immediately.
Saving the Shipping Materials
Do not discard the shipping carton and packing materials. The carton and packing
materials are specifically designed to protect the product during transport.
High End Systems assumes no responsibility for products that have been damaged
during transport. Therefore, you should return a product for repair in its original
shipping carton and packing materials.
®
Studio Spot
250 / Studio Color
Figure 1-1. Removing the bezel.
®
250 User Manual
fixture with bezel removed
Setup and Installation
1
1-1
Advertisement
Table of Contents
Troubleshooting
