Symbols - High End Systems Studio Spot 250 User Manual

• Exclusive Lightwave Research
automatically correct the beam's position if the fixture's head is manually moved
from its programmed position.
• High efficiency, 2000 hour MSD250/2 lamp developed by Philips
with High End Systems
• Motion range of 570° pan and 270° tilt.
• Enhanced construct parameters including ramp/snap, random, and spin functions.
• High efficiency reflector and optical train providing over 7,000 total lumens.
• CYM color mixing.
• Soft-edge output from 115mm Fresnel lens with blending curve output.
• Six additional dichroic colors with seamless color change including CTO and black
light filter.
• Rotatable, variable horizontal and vertical beam shaping.
• Motorized zoom for additional beam angle flexibility.
• Time code synchronization in stand-alone mode via Master/Slave links to any
combination of Technobeam, Studio Spot
250 fixtures.
• DMX analyzer for easy DMX troubleshooting.
• Variable-speed strobe.
• Full dimming and fade-to-black.
• Easy-to-program alphanumeric LED display.
• LED status indicators.
• Precision stepper motors used to control shutter, color wheels, and beam shaping
(lenticular) wheel.
• Remote fixture power up and shut down.
• Optional Laser Aiming Device (LAD™) for beam positioning in daylight or high
ambient light conditions.

Symbols

The following international caution and warning symbols appear in margins
throughout this manual to highlight messages.
Caution: This symbol appears adjacent to Caution messages. Not
Warning: This symbol appears adjacent to high voltage warning
®
Studio Spot 250 / Studio Color
®
multi-phase technology and optical encoders to
®
, Inc.
heeding these messages could result in personal injury and/
or damage to equipment.
messages. Not heeding these messages could result in
serious personal injury.
®
250 User Manual
®
, Studio Color 250, and Studio Spot
®
in conjunction
Introduction intro-3