Construct Parameters - High End Systems Studio Spot 250 User Manual

Table A-1. DMX Start Channels
Fixture Order in the Link
21
22
23
24
25
26
27
28
29
30
31
32
33
34
*Note: Up to 28 Studio Spot 250 fixtures can be connected to one link.
Channels 505 - 512 cannot be used due to Studio Spot 250's 18-
channel range.
**Note: Although there are enough available DMX channels to link up to 34
Studio Color 250 fixtures, you must use a DMX splitter to connect more
than 32 fixtures per link. The 32 device limit complies with the EIA-485
standard. Connecting more than 32 devices per link without a DMX
splitter will eventually deteriorate the digital signal.

Construct Parameters

Construct parameters (also referred to as DMX protocol) are the specific controller
values for each construct available on the fixture. For more information on the
available fixture constructs, see "Fixture Constructs" on page 3-2.
Studio Spot
Table A-2 lists the 18 Studio Spot 250 constructs and their corresponding DMX
controller values. If you have a numeric-type controller, use the Value Decimal (dec.)
column. If you have a fader-type controller, use the Value Percentage (%) column. If
your controller allows you to program hex values, use the Value (hex) column.
A-2 DMX Control
Studio Spot 250 DMX Start
Channels
361
379
397
415
433
451
469
487*
®
250 Construct Parameters
Studio Color 250 DMX Start
301
316
331
346
361
376
391
406
421
436
451
466
481**
496**
®
Studio Spot 250 / Studio Color
Channels
®
250 User Manual