2. Connect the female XLR cable connector of the same data cable to the first (or
next) fixture's 3-pin or 5-pin Data In connector (see Figure 1-10).
DMX controller
Figure 1-10. Data In and Data Out connectors on the fixture's side panel.
3. Continue using this method to link the remaining fixtures together by connecting a
male XLR cable connector (with attached data cable) to one fixture's Data Out
connector and the female XLR cable connector of the same data cable to the next
fixture's Data In connector (see Figure 1-11).
See "DMX Start Channels" on page A-1 for information on how many fixtures can
be connected per link.
Caution: Do not connect more than one Data In and one Data Out
connector to each fixture.
DMX controller
1-10
Setup and Installation
3-pin Data
Out connector
Female XLR
cable connector
Figure 1-11. Linking the fixtures.
5-pin Data
Out connector
5-pin Data
In connector
3-pin Data
In connector
terminator
®
Studio Spot
250 / Studio Color
®
250 User Manual