Forward And Reverse Spins; Preset Programming; Creating A Scene - Step By Step Example; Choosing A Scene To Create/Edit - High End Systems Studio Spot 250 User Manual

Forward and Reverse Spins

A forward spin on all wheels and positions means the wheel or position spins
clockwise as you are looking at the projected image. A reverse spin means the wheel
or position spins counter-clockwise.

Preset Programming

This section provides an example of how to program your fixtures for stand-alone
operation using the on-board memory in each fixture to create, store, and play back
scenes. Preset programming involves accessing the fixture's menu system. For more
information on how to access the menu system and a complete menu map of the
preset programming options, see "Chapter 4 Understanding the Menu System" on
page 4-1.

Creating a Scene - Step By Step Example

Follow the example below to create a sample scene using the fixture's menu system to
choose a value for each of the fixture's available constructs. For more information on
available construct parameters, see the menu map in Table 4-1 on page 4-2 or Table
4-2 on page 4-10.

Choosing a Scene to Create/Edit

1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "PRST" menu
and press the <Enter> button to select the "PRST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "EDIT" menu
and press the <Enter> button to select the "EDIT" menu.
4. Using the <Up> and <Down> arrow buttons, scroll to the scene you
want to create (in this example, "SN01") and press the <Enter> button to
select the desired scene.
®
Studio Spot 250 / Studio Color
®
250 User Manual Preset Programming
5
5-3