Replacing Dichroics; Figure 7-8. Remove The Fixture's Bezel - High End Systems Studio Spot 250 User Manual

Replacing Studio Spot
Components
This section explains how to remove and replace individual components in the Color,
Litho, and effects wheels for Studio Spot 250 fixtures. You can install any dichroic,
gobo, litho, or effect in Studio Spot 250 or Studio Color 250 fixtures that adheres to
the specifications listed in the section titled "Dichroic, Litho, and Effect Specifications"
on page intro-7.
You can replace dichroics, lithos, or effects if they are damaged or broken, to change
their order in the wheel, to clean them, or to install a new or custom dichroic, litho, or
effect. (See "Optional Accessories" on page intro-8 for ordering information.)
If applicable, remove all pieces of broken glass in the fixture when you replace the
dichroic, litho, or effect.
Warnings: Disconnect power before servicing.
Equipment surfaces may reach temperatures up to 130° C
(266° F). Allow the fixture to cool before handling.

Replacing Dichroics

To replace a dichroic in the color wheel:
1. Remove the fixture's bezel cover by releasing the two bezel latches (see Figure
7-8).
release the two
bezel latches
®
Studio Spot 250 / Studio Color
®

Figure 7-8. Remove the fixture's bezel.

®
250 User Manual
250 Wheel
fixture with bezel removed
General Maintenance
7
7-7