Figure 1-14. Attaching A Clamp And Safety Cable To The Fixture - High End Systems Studio Spot 250 User Manual

3. Attach suitable clamps through the center holes on the base of the fixture (see
Figure 1-14). Use locking washers when attaching the clamps to the fixture's base.
holes on
the
fixture's
base

Figure 1-14. Attaching a clamp and safety cable to the fixture.

4. Tighten the clamps firmly to the fixture's base and to the support.
5. Loop one or more suitable safety cables around the support, through the side
holes in the fixture's base, and around the fixture's handles (see Figure 1-14).
1-14 Setup and Installation
safety
cable
®
Studio Spot 250 / Studio Color
truss
clamp
locking
washers
®
250 User Manual