Figure 1-2. Remove The Two Panel Covers; Figure 1-3. Loosen The Two Display Panel Retaining Screws - High End Systems Studio Spot 250 User Manual

two panel retaining screws
3. Using a Phillips-head screwdriver, loosen (but do not remove) the two display panel
retaining screws from each side of the fixture (see Figure 1-3).

Figure 1-3. Loosen the two display panel retaining screws.

®
Studio Spot 250 / Studio Color

Figure 1-2. Remove the two panel covers.

®
250 User Manual
two panel covers
LED display panel
retaining screw
Setup and Installation
1
1-3