Setting Factory Defaults (Fact) - High End Systems Studio Spot 250 User Manual

Setting Factory Defaults (FACT)

When you set this menu item on, all factory options return to their default settings.
Studio Spot 250 and Studio Color 250 fixtures are shipped from the factory with the
following options set to the following defaults:
• pan/tilt swap = off
• tilt invert = off
• pan invert = off
• LED display = on and bright
• LED display invert = off
• lamp life warning = disabled
• preset playback = off
To change the factory option default setting:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "SET" menu
and press the <Enter> button to select the "SET" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "FACT" menu.
(This will be the first menu displayed.) Press the <Enter> button to select
the "FACT" menu.
4. Using the <Up> and <Down> arrow buttons, choose "ON" to set the
factory option defaults on, or "OFF" to manually set the factory option
or
defaults off. Press the <Enter> button to select the desired option.
Note: Selecting the "OFF" option will have no effect on the individual preset
values. To change the value of any of the individual presets listed
above, you must access each preset's corresponding menu item.
When you change any of the preset default values individually, this
menu item will automatically be turned off.
®
Studio Spot 250 / Studio Color
®
250 User Manual Understanding the Menu System
4
4-21