Copying The Boot Code (Boot); Performing Self Tests (Self) - High End Systems Studio Spot 250 User Manual

Copying the Boot Code (BOOT)

When you upload new software to Studio Spot 250 and Studio Color 250 fixtures, the
new software may contain a new boot code which must be copied to each fixture.
This is apparent if the LED displays a "BOOT DIFF" error. Do not remove power from
the fixture while performing a boot copy.
To accept and store the new boot code:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "TEST" menu
and press the <Enter> button to select the "TEST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "BOOT"
option and press the <Enter> button to select the "BOOT" option. The
fixture will store the new boot code, then automatically home.

Performing Self Tests (SELF)

This menu item performs the appropriate self tests for the following:
• ALL - performs all of the self tests listed below
• PAN - moves the pan motor from 0° to 570°
• TILT - moves the tilt motor from 0° to 270°
• COL - rotates the color wheel from position 1 through 13*
• LTO - rotates the litho wheel from position 1 through 8 and from 0° to 359°
within the wheel*
• CYAN - divides the cyan color wheel into eight equal sections (positions) and
rotates the cyan color wheel from position 1 through 8**
• MAGN - divides the magenta color wheel into eight equal sections (positions)
and rotates the magenta color wheel from position 1 through 8**
• YELW - divides the yellow color wheel into eight equal sections (positions) and
rotates the yellow color wheel from position 1 through 8**
• FX - rotates the litho wheel from position 1 through 5 and from 0° to 359°
within the wheel*
• BEAM - moves the beam shaping (lenticular wheel) from 0° to 359°**
• FCUS - moves the Studio Spot 250 lens through the entire focus range or the
Studio Color 250 zoom through the entire beam angle range
• IRIS - moves the iris from closed to fully open*
• SHUT - performs strobe functions
• DIM - moves the dim flag from closed to fully open
*menu items only available for Studio Spot 250 fixtures
**menu items only available for Studio Color 250 fixtures
®
Studio Spot 250 / Studio Color
®
250 User Manual Understanding the Menu System
4
4-31