Placing The Fixture In Setup Mode (S/Up) - High End Systems Studio Spot 250 User Manual

To perform a self test:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "TEST" menu
and press the <Enter> button to select the "TEST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "SELF" menu
and press the <Enter> button to select the "SELF" menu.
4. Using the <Up> and <Down> arrow buttons, scroll to the desired option
(listed above). Press the <Enter> button to select the desired option. The
fixture will perform the selected self test.
5. Press the <Menu> button to exit the test.
Note: The self tests will run continuously until you press the <Menu> button
to exit the test.

Placing the Fixture in Setup Mode (S/UP)

This menu item allows you to place the fixture in setup mode so that you can
mechanically home your fixture. A fixture that is out of home (i.e., the dim flags or iris
loses position), will emit an unusually loud clicking noise when strobing or
electronically homing. For more information on how to mechanically home the
fixture, contact High End Systems customer service (see "Contacting High End
Systems" on page ii).
To place the fixture in setup mode:
1. Press and hold the <Menu> button until "ADDR" appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the "TEST" menu
and press the <Enter> button to select the "TEST" menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the "S/UP" option
and press the <Enter> button to select the "S/UP" option.
4. When the LED displays "SET NOW," mechanically home the fixture.
5. After mechanically homing the fixture, press any button. This causes the
fixture to electronically home.
4-32 Understanding the Menu System
®
Studio Spot 250 / Studio Color
®
250 User Manual