Test Options Menu
This menu lets you manually Home the fixture and change DMX values for parameters.
To Enter the Test Options Menu:
1. Press the
MODE/ESC button to enter the first level of the menu system. The display will
MODE
/ ESC
show Address and Info as the first two options in the top menu level.
*
The red star
indicates the current option.
2. Using the
3. Press the
button to select.
Homing the Fixture
The SHAPESHIFTER fixture automatically homes whenever it is connected to power. The following
options are available to let you manually home all the fixture motors or motors for specific
functions:
All: Reset all motors
Pan & Tilt: Reset Pan/Tilt motors
Others: Reset LED module motors
For example, to manually home the LED module motors:
1. Navigate to and select the Test menu as shown above.
2. Using the
buttons, scroll to Home and press the
3. Using the
automatically begins homing the motors for the outer ring of LED modules.
Manual Ctrl
This test option lets you manually set a DMX value for any of the SHAPESHIFTER fixture's DMX
channels. Auto Program is the default setting. Refer to Chapter 5: DMX Programming on page
35 for specific information on DMX value settings for each parameter.
For example, to change the Mix Color Function from RGB to CMY:
1. Navigate to and select the Test menu as shown above.
2. Using the
3. Using the
4. Using the
the CMY color function.
SHAPESHIFTER User Manual
buttons, scroll to Test.
buttons, scroll to Others and press the
buttons, scroll to Manual Ctrl and press the
buttons, scroll to Mix Color and press the
buttons, scroll to a value from 16-31 and press the
button to select.
button to select. The fixture
button to select.
button to select.
button to select
CHAPTER 3
Menu System
27