Changing The Power Cord Cap; Installing A Line Cord Cap - U.k. Only; Vigtig Fikker Heds Information - Danmark - High End Systems Studio Spot 250 User Manual

Changing the Power Cord Cap

Studio Spot 250 and Studio Color 250 fixtures are shipped with an attached power
cord cap. However, different locations (even within the same country) may require a
different power cord cap to connect your fixture to a power outlet. Because of the
variety of power cord caps used worldwide, High End Systems, Inc. cannot make
specific recommendations for the particular power cord cap you should use. Contact
a local authority if you are unsure which type of power cord cap you need to obtain.
If you need to replace the power cord cap, note that the cores in the mains lead are
colored in accordance with the following code:
• green and yellow = earth
• blue = neutral
• brown = live
Warning: Class 1 equipment - This equipment must be earthed.

Installing a Line Cord Cap - U.K. Only

In the United Kingdom, the colours of the cores in the mains lead of this equipment
may not correspond with the colored markings identifying the terminals in your plug.
Therefore, install a line cord cap in accordance with the following code:
• The core which is coloured green and yellow must be connected to the plug
terminal which is marked with the letter "E," or by the earth symbol
coloured green, or green and yellow.
• The core which is coloured blue must be connected to the terminal which is
marked with the letter "N" or coloured black.
• The core which is coloured brown must be connected to the terminal which is
marked with the letter "L" or coloured red.
Warning: Class 1 equipment - This equipment must be earthed.

Vigtig Fikker Heds Information - Danmark

Advarsel: Beskyttelse mod elektrisk chock.
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket
®
Studio Spot 250 / Studio Color
Vigtigt!
eller
®
250 User Manual Setup and Installation
1
, or
1-5