Laser Aiming Device (Lad™) Operation; Intended Audience; Safety Precautions - High End Systems Studio Spot 250 User Manual

Chapter 6
Laser Aiming Device
(LAD™) Operation
If your Studio Spot 250 or Studio Color 250 fixture is fitted with the optional Laser
Aiming Device (LAD), do not operate the laser until you have read and understand
the precautions and recommended operation instructions listed in this chapter.

Intended Audience

Only qualified and trained employees approved by a laser safety officer should be
assigned to install, adjust, and operate the laser equipment.

Safety Precautions

Anytime you use the Studio Spot 250 or Studio Color 250 LAD, you should follow the
safety precautions listed below:
Cautions: 1.
2.
3.
4.
5.
®
Studio Spot 250 / Studio Color
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
Using the Laser Aiming Device with any fixture other
than Studio Spot 250 or Studio Color 250 may result in
damage to both the laser and the fixture as well as
exposure to laser radiation.
Do not point the laser at an audience.
Make sure that the laser beam is never directed at mirror-
like (specular) surfaces (most importantly, at flat mirror-
like surfaces).
When not in use, store the laser (fixture) in a location
where unauthorized personnel cannot gain access to the
laser.
®
250 User Manual Laser Aiming Device (LAD™) Operation
6
6-1