Test Options Menu; Homing The Fixture; Manual Ctrl - High End Systems TechnoArc User Manual

CHAPTER 3
Menu System

Test Options Menu

This menu lets you manually Home the fixture and change DMX values for parameters.
To Enter the Test Options Menu:
1. Press the MODE/ESC button to enter the first level of the menu system. The display will
MODE
/ ESC
show Address and Info as the first two options in the top menu level.
The red star indicates the current option.
*
2. Using the
3. Press the button to select.

Homing the Fixture

The Technospot fixture automatically homes whenever it is connected to power. The following op-
tions are available to let you manually home all the fixture motors or motors for specific functions:
All: Reset all motors
Others: Reset other motors
Shutter: Reset shutter and/or dimmer
Colors: Reset color wheel
Pan & Tilt: Reset Pan/Tilt motors
For example, to manually home the gobo wheel motors:
1. Navigate to and select the Test menu as shown above.
2. Using the buttons, scroll to Home and press the
3. Using the
automatically begins homing the motors for Gobo Wheel 1 and Gobo Wheel 2.

Manual Ctrl

This test option lets you manually set a DMX value for any of the Technospot fixture's 21 DMX
channels. Auto Program is the default setting. Refer to Chapter 4: DMX Programming on page
35 for specific information on DMX value settings for each parameter.
For example, to change the static color wheel position to blue:
1. Navigate to and select the Test menu as shown above.
2. Using the
3. Using the
color wheel.
4. Using the
the blue color position on the fixed color wheel.
32
buttons, scroll to Test.
buttons, scroll to Gobos and press the
buttons, scroll to Manual Ctrl and press the
buttons, scroll to Color Wheel and press the
buttons, scroll to a value from 48–79 and press the
button to select.
button to select.The fixture
button to select.
button to select the fixed
button to select
TechnoArc User Manual
TM