Alignment Procedure; Figure 6-3. Ideal Position Of The Laser; Figure 6-4. Orient The Fixture For Laser Alignment - High End Systems Studio Spot 250 User Manual

3.3 in. (8.4 cm)
Studio Spot 250 fixture
You might need to realign the laser periodically in order to maintain its optimal
position. However, the decision of whether or not to align the laser is entirely up to
you. If the laser strays from its optimal position, but it gives you enough accuracy for
your needs, you do not have to align it.

Alignment Procedure

You can use either the fixture's on-board menu system or your DMX controller to
complete the alignment procedure below.
1. Physically orient the fixture so the beam will point toward a white wall no less
than 10 ft. (3 m) away (see Figure 6-4).
6-4 Laser Aiming Device (LAD™) Operation Studio Spot

Figure 6-3. Ideal position of the laser.

Figure 6-4. Orient the fixture for laser alignment.

3.5 in. (8.9 cm)
Studio Color 250 fixture
sturdy
surface
10 ft. (3 m) minimum
®
250 / Studio Color
white wall
®
250 User Manual