Set Fixture Parameters; Dmx Address; Info Menu - High End Systems SolaFrame 3000 User Manual

Set Fixture Parameters

This section provides instructions to configure and set up the SolaFrame 3000. See
User Interface on the previous page
Provide power to the fixture before configuring it. If you do not provide power, the fixture will
use battery power to power the user interface.

DMX Address

Navigate: Main Menu → Address
Set the DMX address for the fixture. The default value is 001.

Info Menu

Set the Time Information
Navigate: Main Menu → Info → Time Info
Parameter
Current Time
Ttl Life Hrs
Last Run Hrs
LED Hours
Timer PIN
Clr Last Run
LED Time PIN
Clear LED Time
Configure the Fixture
for information on the navigation buttons.
Value
Running time of the fixture from the last time that
XXXX (Hours) the fixture was powered on, shown in hours (h). The
counter resets after the fixture is turned off.
XXXX (Hours) Total running time of the device, shown in hours (h).
Running time of the fixture from the last time that
XXXX (Hours)
the fixture was powered on, shown in hours (h).
Total running time of the fixture LEDs, shown in
XXXX (Hours)
hours (h).
Enter the Timer PIN. The default Timer PIN is 038.
Password = XXX You must enter the Timer PIN in order to access the
Clr Last Run parameter.
You must enter the Timer PIN to access this para-
ON
•
meter. Select ON to clear the value for the Current
OFF
•
Time parameter for the fixture.
Enter the LED Time PIN. The default LED Time PIN is
Password = XXX 038. You must enter the LED Time PIN in order to
access the Clear LED Time parameter.
Please contact technical support at High End
Systems, Inc. before using this parameter to clear
the LED Hours value. See
Systems on
ON
•
You must enter the LED Time Pin to access this
OFF
•
parameter.
Select ON to clear the value for the LED Hours
parameter.
Description
Contacting High End
page 1.
Navigate the
15