Table of Contents
Advertisement
Unlocking the Menu System
To unlock the menu system, press and hold the Menu button until the display changes to the
2-line format. The menu system is protected against inadvertent menu changes by requiring
the Menu button to be held for a few seconds before allowing entry to the menus. DMX
Address Menu is the first option on the top menu level.
Exiting the Menu System
To exit the menu system, keep pressing the Menu button to back out of each menu level until
the High End Systems logo appears. The word AUTOLOCK will appear briefly on the display to
indicate the fixture's software is "locking" the display. The display switches back to the large
8-character format and, after a few seconds, begins the standard display for the locked mode
as described above.
Menu Map
Use the following table to navigate the menu options on the Power Hub.
Level 1
Level 2
enters /exits Menu System and moves up levels
moves between items on same level.
SET DMX START CHANNEL: ###
DMX ADDRESS
MENU
FACTORY DEFAULT
SETTINGS: ###
SET
PARAMETERS
DISPLAY LEVEL:
MENU
MIRROR 2 QUICK PATH:
PROTOCOL MODE:
FIXTURE
CROSSLOAD
MODE MENU
FIRMWARE:
Roadster Orbital Head System User Manual
Level 3
Option/Setting
scrolls between values
selects
selects
1-512
ON
OFF
ON
OFF
ON
OFF
STANDARD
NO
YES
CHAPTER 3
Operation and Maintenance
Description/Notes
Selected value becomes the first
DMX value in the range for that Mirror
Head on a DMX 512 link.
Reverts Mirror Head to default setting
Indicates a factory default has
changed
Turns display on
Display fully dimmed when menu is
locked
Allows mirror to take the shortest path
to the selected position
Disables the Quick-Path feature
Factory default setting
Safe setting
Uploads Catalyst software to all other
Catalyst fixtures on the link
19
Advertisement
Table of Contents
