Chapter 2: Setup And Configuration; Hardware Setup; Unpacking The Fixture - High End Systems DLHD High Definition Digital Light User Manual

Chapter 2:
Setup and Configuration
Hardware setup includes mounting, connecting to power and establishing
Ethernet and DMX links. Software setup includes launching the Content
Management Application (CMA) and configuring the fixture for DMX control.

Hardware Setup

The following steps make up the hardware setup for DLHD fixtures:
1. Unpack DLHD Media Server.
2. Install power cord cap if necessary for your location.
3. Mount the fixture upright or suspended from a standard truss.
4. Connect to an Ethernet network linked to a computer or an Axon media server
running CMA software, and any other DLHD, DL.3 or Axon units you wish to
control via the CMA.
5. Connect the fixture to a DMX controller via DMX cabling or Art-Net on the Ethernet
network.
6. Connect the fixture to power.

Unpacking the Fixture

Your DLHD fixture ships in a road case specifically designed to protect the product during
transport. When unpacking, inspect both the outside of the fixture and the projector for physical
damage to components.
Your fixture ships with the following:
• One DLHD fixture in road case
• Two mounting brackets
• One safety cable
• Documentation CD that contains
— CMA application
— User Manual in .pdf format
— Fixture software
— Recovery software image
High End Systems® assumes no responsibility for products that are damaged during transport.
Return a product for repair in its road case.
Before sending anything to the factory, call your High End Systems dealer/distributor for a
Return Material Authorization (RMA) number. The factory cannot accept any goods shipped
without an RMA number.
DLHD Digital Light User Manual 5