7.2
Advanced synchronous control
"Advanced synchronous control" can be achieved using software instead of controlling mechanically with gear, shaft, speed
change gear or cam, etc.
"Advanced synchronous control" synchronizes movement with the input axis (servo input axis, command generation axis, or
synchronous encoder axis), by setting "advanced synchronous control parameters" and starting synchronous control on each
output axis.
Refer to the following for details of advanced synchronous control.
MELSEC iQ-R Motion Module User's Manual (Advanced Synchronous Control for Simple Motion Mode)
7
7 EXPANSION CONTROL
221
7.2 Advanced synchronous control
Downloaded from
ManualsNet.com
search engine