9.5
This function monitors start history and current value history stored in the buffer memory of the Motion module on the
operation monitor of an engineering tool.
Start history
The start history logs of operations such as positioning operation, JOG operation, and manual pulse generator operation can
be monitored. The latest 64 logs
(whether the operations have been started in a predetermined sequence) at system start-up.
For the starting history check method, refer to "Help" in the "Simple Motion Module Setting Function" of an engineering tool.
*1 GX Works3 can be monitored 256 times.
Set the clock of CPU module.
Refer to the following for setting method.
GX Works3 Operating Manual
There may be an error in tens of ms between the clock data of the CPU and the time data of the Motion
module.
9 COMMON FUNCTIONS
322
9.5 History Monitor Function
Downloaded from
ManualsNet.com
History Monitor Function
*1
are stored all the time. This function allows users to check the operation sequence
search engine