Monitor Data For Slave Device Operation - Mitsubishi Electric MELSEC iQ-R Series User Manual

Monitor data for slave device operation

[Md.160] to [Md.163] Optional SDO transfer result
Used in the servo transient transmission function. Refer to the following for details.
Page 348 Servo Transient Transmission Function
Refresh cycle: At command request
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 409 Monitor data for slave device operation
12
[Md.164] to [Md.167] Optional SDO transfer status
Used in the servo transient transmission function. Refer to the following for details.
Page 348 Servo Transient Transmission Function
Refresh cycle: At command request
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 409 Monitor data for slave device operation
12 DATA USED FOR POSITIONING CONTROL
511
12.7 Monitor Data
Downloaded from ManualsNet.com search engine