Mitsubishi Electric MELSEC iQ-R Series User Manual page 483

[Md.54] Start (Year: month)
The starting time (Year: month) is stored.
Buffer memory configuration
b15 b14 b13 b12
(1)
Refresh cycle: At start
If a start signal is issued against an operating axis, a record relating to this event may be output before a
record relating to an earlier start signal is output.
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 400 System monitor data
[Md.5] Start (Day: hour)
The starting time (Day: hour) is stored.
Buffer memory configuration
b15 b14 b13 b12
(1)
Refresh cycle: At start
If a start signal is issued against an operating axis, a record relating to this event may be output before a
record relating to an earlier start signal is output.
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 400 System monitor data
[Md.6] Start (Minute: second)
The starting time (Minute: second) is stored.
Buffer memory configuration
b15 b14 b13 b12
(1)
Refresh cycle: At start
If a start signal is issued against an operating axis, a record relating to this event may be output before a
record relating to an earlier start signal is output.
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 400 System monitor data
Downloaded from ManualsNet.com
b11 b10 b9 b8 b7 b6 b5
(2) (3)
b11 b10 b9 b8 b7 b6 b5
(2) (3)
b11 b10 b9 b8 b7 b6 b5
(2) (3)
search engine
b4 b3 b2 b1 b0
(4)
b4 b3 b2 b1 b0
(4)
b4 b3 b2 b1 b0
(4)
12 DATA USED FOR POSITIONING CONTROL
Stored contents Storage value
(1) Year (tens place) 0 to 9
(2) Year (ones place) 0 to 9
(3) Month (tens place) 0, 1
(4) Month (ones place) 0 to 9
Stored contents Storage value
(1) Day (tens place) 0 to 3
(2) Day (ones place) 0 to 9
(3) Hour (tens place) 0 to 2
(4) Hour (ones place) 0 to 9
Stored contents Storage value
(1) Minute (tens place) 0 to 5
(2) Minute (ones place) 0 to 9
(3) Second (tens 0 to 5
place)
(4) Second (ones 0 to 9
place)
12.7 Monitor Data
12
481