Mitsubishi Electric MELSEC iQ-R Series User Manual page 364

Setting items
The refresh setting has the following items.
Item
Refresh at the set
timing.
10 PARAMETER SETTING
362
10.2 Module Parameter
Downloaded from ManualsNet.com
Transfer to Current feed value
the CPU.
Machine feed value
Feedrate
Axis error No.
Axis warning No.
Valid M code
Axis operation status
Current speed
Axis feedrate
Speed-position switching control positioning amount
External input signal
Status
Target value
Target speed
Amount of the manual pulser driving carrying over
movement
Torque limit stored value/forward torque limit stored value
Special start data instruction code setting value
Special start data instruction parameter setting value
Start positioning data No. setting value
In speed limit flag
In speed change processing flag
Special start repetition counter
Control system repetition counter
Start data pointer being executed
search engine
Reference
Page 486 [Md.20] Feed current value
Page 487 [Md.21] Machine feed value
Page 488 [Md.22] Feedrate
Page 488 [Md.23] Axis error No.
Page 489 [Md.24] Axis warning No.
Page 489 [Md.25] Valid M code
Page 490 [Md.26] Axis operation status
Page 490 [Md.27] Current speed
Page 491 [Md.28] Axis feedrate
Page 492 [Md.29] Speed-position switching control positioning
movement amount
Page 492 [Md.30] External input signal
Page 493 [Md.31] Status
Page 494 [Md.32] Target value
Page 495 [Md.33] Target speed
Page 500 [Md.62] Amount of the manual pulser driving carrying
over movement
Page 496 [Md.35] Torque limit stored value/forward torque limit
stored value
Page 496 [Md.36] Special start data instruction code setting
value
Page 496 [Md.37] Special start data instruction parameter
setting value
Page 496 [Md.38] Start positioning data No. setting value
Page 497 [Md.39] In speed limit flag
Page 497 [Md.40] In speed change processing flag
Page 497 [Md.41] Special start repetition counter
Page 497 [Md.42] Control system repetition counter
Page 498 [Md.43] Start data pointer being executed