Mitsubishi Electric MELSEC iQ-R Series User Manual page 88

2-axis circular interpolation control with center point designation (INC circular)
■Operation chart
In the incremental system, 2-axis circular interpolation control with center point designation, positioning is carried out from the
current stop position (start point address) to a position at the end of the movement amount set in "[Da.6] Positioning address/
movement amount", in an arc path having as its center the address (arc address) of the center point set in "[Da.7] Arc
address".
Forward direction
Reverse direction
Reverse direction
Positioning of a complete round with a radius of the distance from the start point address to the arc center point can be carried
out by setting the movement amount to "0".
Forward direction
Reverse direction
Reverse direction
In 2-axis circular interpolation control with center point designation, an angular velocity is calculated on the assumption that
operation is carried out at a command speed on the arc using the radius calculated from the start point address and center
point address, and the radius is compensated in proportion to the angular velocity deviated from that at the start point.
Thus, when there is a difference (error) between a radius calculated from the start point address and center point address
(start point radius) and a radius calculated from the end point address and center point address (end point radius), the
composite speed differs from the command speed as follows.
Start point radius > End point radius
Start point radius < End point radius
3 MAJOR POSITIONING CONTROL
86
3.2 Setting the Positioning Data
Downloaded from ManualsNet.com
Start point address
(current stop position)
Radius
Arc center point
(arc address)
Movement amount to the end point
Arc center point
(arc address)
As compared with the speed without error, the speed becomes slower as end point address is reached.
As compared with the speed without error, the speed becomes faster as end point address is reached.
search engine
Movement by circular interpolation
Movement amount to the end point
Forward direction
Movement amount = 0
Forward direction