Communication Port Setup - Husky MP2500 Manual

8. Press E to continue and you'll see a screen like this:
9. Press any key other than C to begin formatting. Press C twice to abort.

10.1.5 Communication Port Setup

The MP2500 serial communications port (Port 1) is permanently assigned
as COM2. Use these options to select and configure H
communications for COM2, or to restore IBM mode communications.
Note that H
USKY
the set up screen (because this function is common between the H
MP2500 and FS3), and has the following advantages:
•
Support for protocols (XON/XOFF and any optional protocols installed),
providing more secure data transfer
•
Configurable handshaking, to suit a wide variety of devices and
connection methods
•
Faster data transfer (up to 115,200 Baud) for efficient communications
•
Data buffering for reliable fast transfer
•
Compatibility with other H
H FS3)
USKY
This screen will look like this:
Chapter 10: The Utilities
mode communications is referred to as "FS3 mode" on
USKY
handheld computers (such as the
mode
USKY
USKY
73