The Interlink Utility - Husky MP2500 Manual

15. Now, install any other files that are required on this unit and it's ready
for use again.
To re-install the operating system and keep all the files already on the
CompactFlash drive, don't format it, use the SYS command. First, carry out
steps 1-9 as described above, then:
10. On the unit, type B:SYS C: E to copy the operating system files to
drive C.
11. Reset the unit by holding down S + S + P. (If the Welcome screen is
displayed, press E to acknowledge it.) Immediately press A + 1.
Now type the YKSUH password and press E to display the boot
menu again.
12. Select option 1 to make the CompactFlash the boot device, and press
E - the unit should now boot as normal.

10.5 The INTERLINK utility

You can easily link to a PC to use any of its disk drives or printers by
running Microsoft's INTERLINK utility, which is part of MSDOS 6.x, as
follows:
Note:
For full details of the INTERLINK utility, see your DOS Guides. This
section only provides a brief summary of the process.
1. Connect the unit's serial port to a serial port on a PC, using a standard
"crossed" (null modem) cable.
2. On the desktop PC, run the INTERLINK server: type INTERSVR.EXE
and press Enter.
3. On the MP2500 unit, install the INTERLINK driver by adding this line to
the CONFIG.SYS file:
DEVICE=C:\DOS\INTERLNK.EXE
82 H MP2500 System Developer's Guide
USKY