Control Key Repeat [+]; Redefine Key Scan Codes [+] - Husky MP2500 Manual

Control key repeat [+]

Entry
Exit
Description

Redefine key scan codes [+]

Entry
Exit
Description
Chapter 27: INT 16H, Keyboard Handler
BH Delay
0 250mSec
1 500mSec
2 750mSec
3 000mSec
4..FFH Reserved
AH=2AH
AL=0 (disable) or 1 (enable)
Returns nothing
Controls the keyboard autorepeat facility.
The default is for keys to repeat. This default is
restored by a cold start.
AH=2BH
AL=0 (unshifted table), 1 (shifted table) or 2 (numlock
table)
BH=standard scan code of key (0..128)
BL=new 8 bit token (ASCII code)
Returns nothing
Changes the token generated by any standard key.
You can redefine as many keys as you want and define
the same token for several keys. For example, you
could define the left
Note that the scan codes are used to identify the keys,
NOT ASCII codes, so you can redefine any key to any
standard function.
Key scan codes are listed in Appendix E.
¨ ®
key as .
273