Move Cursor To Graphics Co-Ordinates [+] - Husky MP2500 Manual

Move cursor to graphics co-ordinates [+]

Entry
Exit
Description
190
The sizes are as follows:
Font Character
no. (Y x X)
0 or 128
1 or 129
2 or 130
3 or 131 9 x 14
4 or 132 18 x 7
5 or 133 18 x 14
6 or 134
7 or 135
(Figures in square brackets are for the medium
resolution modes.)
The character spacing (cell size) and cursor size adjust
to the new font automatically. When you change font,
the cursor is left positioned immediately to the right of
the last character output, with the same top line, so you
should normally position the cursor before you output
text in the new font.
This function is ignored in text modes. A related facility
is however provided by function 73H.
Font 7 is a bold version of font 1. For more details of
these fonts, see Appendix C.
AH=61H
CX=col
DX=row
Returns nothing
Moves the cursor to the specified graphics co-
ordinates, in a graphics mode. The position specified is
actually the top left corner of the current character cell.
Cell
(Y x X)
7 x 7 8 x 8
7 x 5 8 x 6
9 x 7 10 x 8
10 x 16
20 x 8
20 x 16
5 x 3 6 x 4
7x5 8 x 6
H MP2500 System Developer's Guide
USKY
Co-ordinates
(rows x
columns)
25 x 80 [40]
25 x 106 [53]
20 x 80 [40]
20 x 40 [20]
10 x 80 [40]
10 x 40 [20]
25 x 160 [80]
25 x 106 [53]