Husky MP2500 Manual page 381

Authorise charging (APM)
Entry
Exit
Comment
Set battery level (APM)
Entry
Exit
Comment
Get diskette power level
Entry
Exit
Comment
Appendix G: MP2500, FS3 and FS/2:
AH=65H
AL=charging level
BH=02H (to
BL=03H
CH=04H
CL=05H
DH=06H
DL=07H
AH=status
On the FS3,
authorisation level in APM mode. On the MP2500 there
is no APM mode, so this function has no effect. Battery
charging is controlled using the UTIL utility and INT 15,
function 8AH.
AH=66H
AL=level (0..64H)
AH=status
On the FS3, this function sets the battery level in APM
mode. On the MP2500 there is no APM mode, so this
function has no effect.
AH=73H
AL=drive (0=A:, 1=B:)
AL=100
This is a dummy function for compatibility with Hunter
16. Since the MP2500 will normally only be connected
to a PC diskette via its serial port, the drive power is
irrelevant and can be assumed to be 100%.
minimise
risk
of
inadvertent
operation)
this function sets the charging
359