Husky MP2500 Manual page 382

Control battery change facilities
Entry
Exit
Comment
Get/set battery type (APM)
Entry
Exit
Comment
Set battery capacity (APM)
Entry
Exit
Comment
360
The default level, restored by a cold start, is 0.
AH=7EH
AL=control (0=do not prompt, non-0=prompt)
Returns nothing
On the FS3, this function controls how the unit handles
a battery change (whether or not it prompts the user) in
APM mode. On the MP2500, there is no APM mode so
this function has no effect.
AH=7FH
AL= 0 (get) or non 0 (set)
BL=battery type, if set (0=non-rechargeable,
non 0=rechargeable)
AL=type (0 or 1), if get
On the FS3, use this function to set or get the charging
mode, in APM mode. On the MP2500, there is no APM
mode, and charging is controlled using the UTIL utility
and INT 15, function 8AH.
AH=80H
AL=0 (get) or non 0 (set)
BL=capacity (0..32H) if set
BL=capacity (0..32H) if get
Use this function on FS3 to set/get the battery capacity,
in APM mode. On the MP2500, there is no APM mode
or battery level monitoring, so this function is ignored.
H MP2500 System Developer's Guide
USKY