Husky MP2500 Manual page 6

AC ADAPTOR PRECAUTIONS
USE THE AC POWER ADAPTOR ONLY AFTER READING AND
UNDERSTANDING THE FOLLOWING PRECAUTIONS.
H AC Adaptors are class II (double insulated with no earth) and built to
USKY
EN60950: 1988 or EN60742: 1989, BS415 and DIR73/23/EEC safety
requirements, and international EMC standards including EN55022 classes
A & B.
H AC Adaptors supplied for use in North America meet UL safety
USKY
requirements, FCC Part 15 EMC regulations (classes A and B) and CSA
EMC regulations (classes A and B).
• Hazardous voltages inside, do not attempt to open.
• No user serviceable parts inside, do not attempt to open.
• Indoor use only.
• Avoid liquid spillage, do not connect if suspected damp.
• Ensure ventilation is not restricted.
• Use only the H
never be replaced by an alternative unapproved model, as damage may
result.
• Inspect adaptor before connecting, do not use if there are signs of
damage or deterioration.
• Ensure rechargeable batteries are fitted and they are orientated
correctly.
• Battery chemical leakage is corrosive, do not touch. (In case of
accidental contact wash immediately with running water.)
• Ensure that connectors are firmly mated.
• Avoid mechanical strain to cables or connectors.
• Switch on or connect mains (line) supply only after making all
connections.
• Switch off or disconnect mains (line) supply before disconnecting.
vi
MP2500 AC Adaptor. This special adaptor should
USKY
H MP2500 System Developer's Guide
USKY