Husky MP2500 Manual page 87

Removing and refitting the battery cap will always turn off the unit, but when
you turn on again, the MP2500 will usually power up in the application that
was running when you turned off.
Under normal circumstances the MP2500 should be very reliable, but if you
use it for software development, a user program may crash and 'lock up'
the machine. If this happens, try the following emergency breakout
procedures. If these do not help, contact your local distributor or H
Note: The following description is for the standard English keyboard
layout shown at the start of Chapter 1. If you are using a different
keyboard, press the keys in the corresponding positions; their
legends may differ.
If you cannot break out of a program for some reason, the following should
always work unless there is a serious hardware malfunction:
1. Turn the MP2500 off (e.g. remove and replace the battery cap).
2. Hold down the X and P keys.
3. Press P briefly and release X and P.
4. The MP2500 should exit any program and reboot (unless there is a
hardware malfunction). You may however require several attempts, as
timing is critical.
Chapter 9: Troubleshooting
Emergency breakout
Use this facility to break out of any
application. You may wish to restrict
access to the information on this page.
Emergency hardware reset
Use this facility to reset a machine on
which emergency breakout fails.
.
USKY
65