The Handstrap - Husky MP2500 Manual

8.3 The handstrap

The MP2500
normally fitted with a
hand strap,
fastens to the back of
the unit.
It is held in place by
two metal hooks at
each end of the strap,
that fit into circular
recesses at the back
of the unit, and plastic
retianers that also clip
into the recesses. The
tension in the elastic
strap also helps hold
the hooks in place.
To remove the hand strap:
•
Turn the MP2500 over and
grip the plastic retainer at one
end. Pull it up to unclip the
plastic clip from the recesses.
•
Now, stretch the strap and the
hooks should slide backwards
so you can lift them out of the
recesses.
Chapter 8: Regular Maintenance
is
which
Plastic retainer
Metal clip
Elastic strap
55