Husky MP2500 Manual page 152

ECHO
Use
To control whether characters will be displayed on the screen as they are
transmitted.
Notes
Data transmission and reception are not affected by echoing and the
displayed characters are not passed to user programs or entered in the
receive buffer.
ECHO is usually used to mimic full duplex operation with a half duplex
remote system. If the remote system is operating in full duplex mode,
selecting ECHO will display each character twice!
Setting
Yes
No Characters are not echoed.
Echoing a non-text file is not recommended.
FS3 MODE
Use
To select IBM or FS3 (H
Notes
See section 10.1.6 and 13.3 for information on FS3 and IBM
communications modes.
130
Result
Characters are echoed as they are transmitted.
) communications.
USKY
H MP2500 System Developer's Guide
USKY