Husky MP2500 Manual page 385

Control/monitor fast discharge
Entry
Exit
Comment
The FPM Functions
Entry
Exit
Comment
Appendix G: MP2500, FS3 and FS/2:
AH=96H
AL=control (0=start, 1=stop, 2=get status)
AH=0 (success) or non 0 (failure)
AL=status (0=off, 1=on) if get
On the FS3, use this function to get or set fast
discharge status. On the MP2500, there is no fast
discharge facility, so this function is ignored.
AH=9CH
AL=FPM function number
Varies
On the FS3, use this function to access a range of
functions for FPM mode. On the MP2500, there is no
FPM mode, so these functions are ignored.
363